BACHELOR OF SCIENCE IN MECHANICAL ENGINEERING – B.SC. (ME)-UCP Lahore
Course Name:
BACHELOR OF SCIENCE IN MECHANICAL ENGINEERING – B.SC. (ME)
Course Overview:
Total Credits: 135 sch. CGPA Requirement for Degree 2.0 or more.
No. of Semesters:
8
Requirements:
F.Sc (Pre-Engineering)/ A’ Level* (Math, Physics & Chemistry) with at least 60% marks.
Or
Diploma in Associate Electrical/Electronic Engineering with at least 60% marks (for Electrical Engineering)
Or
Diploma in Associate Mechanical Engineering with at least 60% mark (for Mechanical Engineering)
*A-Level students will have to submit equivalence certificate issued by the Inter Board Committee of Chairmen (IBCC), Islamabad.
Admission Procedure
Admission to each program is granted strictly on merit which is determined on the basis of marks obtained in the following examinations:
HSSC – A-Levels/ Equivalent Exam Results – 70% weightage for determining the eligibility.
Entry Test – This test has 30% weightage and is considered for eligibility only.
Final merit list is prepared on the basis of marks obtained in the last examination.
NOTE: The merit and waiting lists are posted on the website and the notice board of Faculty. Admission letters to the successful applicants are issued and the fees are to be paid within the specific date.
Course duration: 4 years
How to apply:
-
Obtain information from the Admissions Office or website.
-
Get a prospectus from the Admissions Office.
-
All applications must be filled out and deposited at the Admissions Office within the deadlines for each semester (check the dates and deadlines for each session from the Admissions Office or website).
-
All applications must have attested copies of relevant documents attached, especially degrees and/or certificates of higher education completed before applying to any program at UCP.
-
Obtain a date for the written test and interview and receive a test admittance slip. Tests will be conducted online within the specified UCP campus.
-
Final lists of successful candidates will be displayed on a specified date and intimations will be sent to the student’s mailing address.
-
After receipt of the admission letter, deposit the admission fee and fee for the first semester.
-
A roll number will be issued to each student and a Student ID card will be made.
-
Students are required to come to the Orientation Seminar on the given date.
-
Classes will commence as per schedule.
Curriculum:
|
Semester 1 |
||||
|
|
Subject |
Credit hrs |
Contact hrs/week |
|
|
|
Labs |
|
||
|
|
Basic Applied English |
2+0 |
2 |
0 |
|
|
Applied Calculus |
3+0 |
3 |
0 |
|
|
Applied Physics |
3+0 |
3 |
0 |
|
|
Computer System and Programming |
1+1 |
1 |
3 |
|
|
Engineering Drawing & Graphics |
2+2 |
2 |
6 |
|
Semester 2 |
||||
|
|
Subject |
Credit hrs |
Contact hrs/week |
|
|
|
Labs |
|
||
|
|
Islamic Studies/Ethics& Pak Studies |
2+0 |
2 |
0 |
|
|
Linear Algebra, Differential Equations |
4+0 |
4 |
0 |
|
|
Basic Electrical Engineering |
2+1 |
2 |
3 |
|
|
Applied Thermodynamics – I |
2+1 |
2 |
3 |
|
|
Engineering Mechanics – I |
2+1 |
2 |
3 |
|
|
Workshop Technology |
0+2 |
0 |
6 |
|
Semester 3 |
||||
|
|
Subject |
Credit hrs |
Contact hrs/week |
|
|
|
Labs |
|
||
|
|
Technical Report Writing |
2+0 |
2 |
0 |
|
|
Complex Variables & Transforms |
3+0 |
3 |
0 |
|
|
Applied Thermodynamics – II |
3+1 |
3 |
3 |
|
|
Engineering Materials |
3+0 |
3 |
0 |
|
|
Mechanics of Materials-I |
2+1 |
2 |
3 |
|
|
Engineering Mechanics- II |
2+1 |
2 |
3 |
|
Semester 4 |
||||
|
|
Subject |
Credit hrs |
Contact hrs/week |
|
|
|
Labs |
|
||
|
|
Numerical Analysis (Numerical Methods in Engineering) |
2+1 |
2 |
3 |
|
|
Manufacturing Processes |
3+1 |
3 |
3 |
|
|
Fluid Mechanics – I |
2+1 |
2 |
3 |
|
|
Mechanics of Machines – I |
3+0 |
3 |
0 |
|
|
Machine Design & CAD – I |
2+1 |
2 |
3 |
|
|
Mechanics of Materials – II |
3+1 |
3 |
3 |
|
|
Total Hrs |
20 |
16 |
12 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Semester 5 |
||||
|
|
Subject |
Credit hrs |
Contact hrs/week |
|
|
|
Labs |
|
||
|
|
Communication Skills |
2+0 |
2 |
0 |
|
|
Machine Design and CAD II |
3+1 |
3 |
3 |
|
|
Fluid Mechanics –II |
3+1 |
3 |
3 |
|
|
Heat & Mass Transfer |
2+1 |
2 |
3 |
|
|
Mechanics of Machines II |
3+1 |
3 |
3 |
|
Semester 6 |
||||
|
|
Subject |
Credit hrs |
Contact hrs/week |
|
|
|
Labs |
|
||
|
|
Metrology & Quality Assurance |
3+1 |
3 |
3 |
|
|
Finite Element Analysis |
3+1 |
3 |
3 |
|
|
Mechanical Vibrations |
3+1 |
3 |
3 |
|
|
Industrial Electronics |
2+1 |
2 |
3 |
|
|
Aerodynamics / Prod. Tooling Design/Mechatronics |
3+1 |
3 |
3 |
|
Semester 7 |
||||
|
|
Subject |
Credit hrs |
Contact hrs/week |
|
|
|
Labs |
|
||
|
|
Industrial Management |
3+0 |
3 |
0 |
|
|
IC Engines |
2+1 |
2 |
3 |
|
|
Instrumentation & Control |
3+1 |
3 |
3 |
|
|
Final Year Project |
0+3 |
0 |
9 |
|
|
Maintenance Engineering / Manufacturing Systems/Hydraulics & Pneumatics |
3+1 |
3 |
3 |
|
Semester 8 |
||||
|
|
Subject |
Credit hrs |
Contact hrs/week |
|
|
|
Labs |
|
||
|
|
Energy Resources & Utilization |
3+0 |
3 |
0 |
|
|
Power Plants |
3+0 |
3 |
0 |
|
|
Refrigeration & Air Conditioning |
3+0 |
3 |
0 |
|
|
Final Year Projects |
0+3 |
0 |
9 |
|
|
Total Productive Maintenance /Computational Fluid Dynamics/Operations Research |
3+0 |
3 |
0 |